Epoxy Garage Floor Coating in Irving, TX
Professional epoxy and polyaspartic floor coating for Irving’s master-planned communities and Las Colinas townhomes. Diamond grind, vapor test, 15-year warranty.
Dallas Garage Epoxy Floors serves Irving, TX (75061) — installing epoxy and polyaspartic garage floor coatings throughout Las Colinas and Irving’s master-planned communities and townhome neighborhoods. Irving’s residential mix ranges from attached townhomes with single-car garages to larger detached homes with two-car bays in communities near the Las Colinas urban center. We spec the right system for each slab: moisture-tested, diamond-ground, vapor-primed, and finished with a UV-stable polyaspartic topcoat that holds up in DFW’s sun. Call (469) 564-4886 for a free written estimate.
Why Irving Homeowners Need Professional Epoxy
Irving’s location at the geographic center of the DFW metroplex — between Dallas, Fort Worth, and DFW Airport — puts it squarely on North Texas’s Blackland Prairie clay belt. The same expansive soil conditions that cause foundation movement and concrete cracking in Dallas proper apply throughout Irving 75061. Las Colinas’ master-planned communities built during the 1980s–2000s feature concrete slabs that have now been in service long enough to show the effects of seasonal clay movement: hairline cracks at control joints, minor surface spalling, and in some cases delamination of prior sealers or paint.
Irving’s townhome communities present a specific consideration: single-car garage slabs are typically smaller (200–300 sq ft) and often have less ventilation than detached two-car garages, which means moisture vapor can concentrate at higher levels. We test every Irving slab with a calcium chloride kit before committing to a coating system — a step most quick-turn contractors skip.
What We Typically Find in Irving 75061 Slabs
- Las Colinas townhome garages: Smaller single-car slabs, often with prior paint or thin-set adhesive from previous owners. Good candidates for polyaspartic one-day installs given the limited square footage and tight parking schedules.
- Master-planned community homes: 1990s–2000s builder slabs with occasional surface spalling and hairline cracks at control joints from clay soil movement. Repairable before coating without replacement.
- Oil and chemical staining: Irving’s proximity to DFW Airport and its density of auto service businesses means many residential garages see heavier-than-average automotive fluid exposure. Diamond grinding removes stained surface concrete; oil-block primer handles any residual contamination.
- Failed previous coatings: Several master-planned communities in Irving had builder-applied sealers or paint during original construction. These must be fully removed by diamond grinding before epoxy adhesion is achievable.
Our Process for Irving Homes
Free On-Site Estimate
We visit your Irving home, measure, photograph, and run the moisture vapor test. Written quote within 24 hours.
Diamond Grinding
Full slab grind to CSP-2 profile, removing all prior sealers, paint, and surface contaminants.
Repair & Vapor Prime
Cracks and spalling repaired. Vapor-block primer applied on all Irving slabs showing elevated MVE — standard practice on this zip code’s clay-adjacent soil conditions.
Epoxy Base Coat + Flake
100% solids epoxy base coat with full vinyl flake broadcast edge to edge.
Polyaspartic Topcoat
UV-stable clear topcoat. Vehicle-ready at 48 hours. 15-year warranty certificate issued at walkthrough.
Services Available in Irving, TX
Garage Floor Epoxy Coating
Two-day full system for detached garages throughout Irving and Las Colinas.
Polyaspartic One-Day Coating
Ideal for Irving townhome single-car garages — full install in one day, park on it in 24 hours.
Concrete Repair + Coating
Crack and spalling repair before coating on older Irving slabs.
Commercial Epoxy
Industrial systems for Irving’s Las Colinas commercial corridor warehouses and auto shops.
Irving Epoxy Floor FAQ
Do you serve Las Colinas in Irving?
Yes — both residential (townhomes and single-family homes in Las Colinas communities) and commercial (Las Colinas corporate campus facilities and warehouses near the DFW Airport corridor).
Can you coat a small townhome garage in Irving?
Yes. Single-car townhome garages of 200–350 sq ft are a standard job for us. The one-day polyaspartic system is often the best fit for small Irving garages — full install in a single day, minimal disruption to tight parking arrangements.
How long until I can park in my Irving garage after epoxy?
48 hours for the standard two-day system, 24 hours for the one-day polyaspartic system. Light foot traffic is safe in 4–6 hours after the final topcoat.
Is the warranty transferable?
Yes — fully transferable to subsequent owners with no fee or re-inspection. Written certificate issued at project close.
What other DFW areas do you serve?
All of DFW: Plano (75023), Garland (75040), Mesquite (75149), Carrollton (75006), Richardson (75080), Frisco (75033), Grand Prairie (75050), and all of Dallas proper.
Nearby Areas We Also Serve
Free Estimate in Irving — Same-Week Scheduling
Call Dallas Garage Epoxy Floors to book your free on-site estimate anywhere in Irving, TX 75061.